PhidgetLED-64 Advanced
Note: The 1032_0B is identical to the 1032_0, except that you have the option of whether you want to include the USB and LED cables.
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brightness controlled from 0 to 100% within that limit using current control. These LED outputs can also be used to interface other devices that benefit from current control (such as buzzers, fans, and other small, simple electronics).
Most standard LEDs have forward voltages below 2.75 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board output. The forward voltage will default to 2.75V, and the maximum current defaults to 20mA.
Comes packaged with
-
- A Hardware mounting kit (4 nuts and bolts (M3), 4 plastic spacers)
Product Specifications
| Board Properties | |
|---|---|
| Controlled By | USB (Mini-USB) |
| Number of LED Outputs | 64 |
| API Object Name | DigitalOutput |
| Physical Properties | |
| Recommended Wire Size (Power Terminal) | 12 to 26 AWG |
| Power Jack | 5.5 x 2.1mm Center Positive |
| Operating Temperature Min | -40 В°C |
| Operating Temperature Max | 85 В°C |
| Electrical Properties | |
| Current Consumption Min | 70 mA |
| Supply Voltage Min | 6 V DC |
| Supply Voltage Max | 15 V DC |
| Selectable Output Voltage Levels | 1.7, 2.75, 3.9, 5.0 VDC |
| Output Current Limit Max | (Per LED) 80 mA |
| LED Current Limit Max | 80 mA |
| LED Current Limit Resolution | 1.3 mA |
| USB Speed | Full Speed |