12bit Voltage Output Phidget
This board does exactly what it says on the box: It outputs a voltage between 0 and 4.2V with 1mV resolution. Many industrial controllers expect an analog voltage as an input signal, and this Phidget will bridge this communication gap. It will also launch a warning event if it fails to deliver the voltage you’ve selected (for instance, when the attached device is drawing too much current). This board is the fastest, most efficient, and most economical choice for voltage output. The OUT1000 connects to a port on a VINT Hub. See the “Comaptible Products” tab for a list of hubs.
Other Options
If you need higher resolution, electrical isolation, or if you need to produce both positive and negative voltage, take a look at the “Other Voltage Outputs” section.
Product Specifications
| Board Properties | |
|---|---|
| Controlled By | VINT |
| Electrical Properties | |
| Current Consumption Min | 15 μA |
| Current Consumption Max | load + 2.1 mA |
| Current Sourcing | varies* |
| Current Sinking | varies* |
| Voltage Outputs | |
| Number of Voltage Outputs | 1 |
| Voltage Output Max | 4.2 V DC |
| Output Voltage Resolution | (12-bit) 1 mV DC |
| Voltage Output Noise | ± 150 μV DC |
| Physical Properties | |
| Recommended Wire Size | 16 – 26 AWG |
| Operating Temperature Min | -40 °C |
| Operating Temperature Max | 85 °C |
* Current sourcing and sinking capability varies based on selected output voltage. Please visit the technical section of the User Guide for details.