12V/8.4Kg-cm/28RPM 139:1 DC Gear Motor
Product Description
The 3264 is a 12 volt gear motor, generating 8.46 Kg-cm of torque at 28 RPM. This motor is quite compact considering the amout of power it can output.
The planetary gearbox on this motor is more sophisticated than a typical spur gearbox and will provide greater efficiency, higher torque, and quieter motor operation.
Motor Controller and Connection
The 3264 DC motor connects to either of the following controllers:
- 1064 – PhidgetMotorControl HC
- 1065 – PhidgetMotorControl 1-Motor
You’ll need to solder wires to the contacts of the motor in order to connect it to a controller.
Related Products
- 3264E – 12V/8.4Kg-cm/28RPM 139:1 DC Gear Motor w/ Encoder
- 3261 – 12V/0.2Kg-cm/1080RPM 3.7:1 DC Gear Motor
- 3262 – 12V/0.9Kg-cm/285RPM 14:1 DC Gear Motor
- 3263 – 12V/3.0Kg-cm/78RPM 51:1 DC Gear Motor
Resources
- DC Motor and Controller Primer
- Mechanical Drawing
Warnings
 |
The torque this motor produces when it stalls exceeds the rated strength of the gearbox. This means that stalling or very heavily loading this motor can cause serious damage to the gearbox. To avoid damage, avoid sudden loads or any load higher than the Maximum Strength of Gears spec. |
Product Specifications
Motor Properties
| Motor Type | DC Motor |
| Output Power (Mechanical) | 2.9 W |
| Maximum Speed at Rated Voltage | 28 RPM |
| Rated Torque | 8.5 kg·cm |
| Stall Torque | 50 kg·cm |
Electrical Properties
| Rated Voltage | 12 V DC |
| Rated Current | 410 mA |
| Stall Current | 1.5 A |
Physical Properties
| Shaft Diameter | 6 mm |
| Weight | 192 g |
| Recommended Wire Size (Motor) | 20 – 25 AWG |
Gearbox Specifications
| Gearbox Type | Planetary |
| Gear Ratio | 139 184?1221 : 1 |
| Number of Gear Trains | 3 |
| Maximum Strength of Gears | 30 kg·cm |
| Shaft Maximum Axial Load | 35 N |
| Shaft Maximum Radial Load | 25 N |