DC Linear Actuator P5H-24-150mm

The Sinokoko P5H series of linear actuators are high-torque DC motors geared to push or pull a load along the stroke of the actuator. This actuator comes with a built-in potentiometer, allowing your application to monitor the actuator’s position.

The 3545 linear actuator has a stroke length of 150mm, can move at a rate of 24 mm/s and can extert up to 350N of force at lower speeds.

Product Specifications

Motor Properties
Motor Type DC Linear Actuator
Stroke Length 150 mm
Maximum Speed 24 mm/s
Peak Power Point 350 N
Electrical Properties
Rated Voltage 24 V DC
Potentiometer Impedance 5 k?©
Physical Properties
Material Aluminium Alloy
Gear Train Material Powder Metallurgy
IP Rating IP56
Weight 995 g
Operating Temperature Min -25 ?°C
Operating Temperature Max 65 ?°C

DC Motor Controllers

You’ll need a motor controller to get control of the position of this actuator. In order to connect it to a controller, attach the red wire to the “+” terminal on the controller, and the black wire to the “-” terminal.

If you decide to use a motor controller with an analog input, you can connect the integrated potentiometer by soldering the wires to a Phidget cable and connecting it to the input. If you decide to use a stand-alone motor controller, you’ll also need a device with an analog input to read the potentiometer.

Product Controller Properties Electrical Properties Board Properties
Part Number Number of Motor Ports Velocity Resolution Acceleration Resolution Continuous Motor Current Max Controlled By
1064_1B 2 0.79 % Duty Cycle 1.9 % Duty Cycle/s (per motor) 14 A USB (Mini-USB)
1065_0B 1 0.39 % Duty Cycle 24.5 % Duty Cycle/s 5 A USB (Mini-USB)
DCC1000_0 1 0.001 % Duty Cycle 1 % Duty Cycle/s 25 A VINT

Phidget Cables

Functional

To easily connect the internal potentiometer to an IO board we recommend you use a Phidget cable. You can solder multiple cables together in order to make even longer Phidget cables, but you should be aware of the effects of having long wires in your system. The following table describes how to wire the potentiometer to the Phidget cable:

Wire Color Function
White Potentiometer Ground
Blue Potentiometer Wiper
Red Actuator Motor Power
Black Actuator Motor Ground
Yellow Potentiometer Power

 

Product Physical Properties
Part Number Cable Length
3002_0 600 mm
3003_0 100 mm
3004_0 3.5 m
3034_0 150 mm
3038_0 1.2 m
3039_0 1.8 m

If you want an actuator with different specifications you can compare them all below:

Product Motor Properties Electrical Properties Physical Properties
Part Number Stroke Length Maximum Speed Peak Power Point Rated Voltage Weight
3545_0 150 mm 24 mm/s 350 N 24 V DC 995 g
3546_0 150 mm 10 mm/s 750 N 24 V DC 1 kg
3547_0 300 mm 24 mm/s 350 N 24 V DC 1.2 kg
3548_0 300 mm 10 mm/s 750 N 24 V DC 1.2 kg
3570_0 50 mm 32 mm/s (@ 16 mm/s) 50 N 1