Stepper Mounting Bracket (NEMA 23)
This coated steel mounting bracket provides a simple means of attaching a NEMA-23 sized motor to a flat surface. It has two sets of mounting holes, so it can be attached to 56mm planetary gearboxes or mounted directly to the motor. For a list of compatible motors, see the “Compatible Products” tab.
Note: Nuts and screws not included.
Product Specifications
| Physical Properties | |
|---|---|
| Mounting Plate Size | NEMA – 23 |
| Material | Mild Steel (Coated) |
Documents
- Mechanical Drawings
- Download 3D Step File
Stepper Motors
This mounting bracket can fit on any motor or gearbox that uses the NEMA-23 mounting pattern. Here’s a list of stepper motors it fits on:
| Product | Physical Properties | Motor Properties | Electrical Properties | ||||
|---|---|---|---|---|---|---|---|
| Part Number | Mounting Plate Size | Shaft Diameter | Weight | Step Angle | Rated Torque | Maximum Speed (w/1067 Motor Controller) | Recommended Voltage |
| 3330_0 | NEMA – 23 | 1⁄4?€³ | 695 g | 0.9° | 11.2 kg?·cm | 2250 RPM | 12 V DC |
| 3331_0 | NEMA – 23 | 1⁄4?€³ | 686 g | 1.8° | 11 kg?·cm | 3000 RPM | 12 V DC |
| 3332_0 | NEMA – 23 | 12 mm | 1.2 kg | 0.42° | 46.6 kg?·cm | 375 RPM | 12 V DC |
| 3333_0 | NEMA – 23 | 12 mm | 1.3 kg | 0.12° | 150 kg?·cm | 116 RPM | 12 V DC |
| 3334_0 | NEMA – 23 | 12 mm | 1.5 kg | 0.023° | 240 kg?·cm | 25 RPM | 12 V DC |