8A Stepper Phidget

Get moving with this powerful Bipolar Stepper Phidget. With a maximum power supply of 30V, it can provide up to 8A of current to each stepper coil. The result is that you can control the position, velocity and acceleration of one large bipolar stepper using a port on your VINT Hub (See the Connection & Compatiblity tab for a list of hubs). Steppers are especially popular in applications where accurate positioning is important.

Safety and Protection

The Stepper Phidget comes with a number of safety features, since motors have a reputation of damaging unprotected circuits with current spikes when a motor stalls or changes direction under heavy load. There’s a fuse socket with a 5A automotive fuse to protect your Phidget in just such an occasion, and the power terminals are polarity protected in case the power supply gets wired up backwards. The VINT port on this Phidget is isolated from the power circuit, so you don’t have to worry about damaging your hub or computer if something goes wrong. Ensure that this Phidget is in a well-ventilated area if you plan on running it close to maximum specifications.

Power Saving Options

For power-conscious users, we also allow for separate control over the current limit and the holding current limit. If you know your motor will be stationary for long periods of time, but still needs a small amount of holding torque to maintain its position, you can set the holding current appropriately without interfering with the running current limit.

Warning

warning Make sure the power supply is unplugged before attaching or removing wires from the terminal blocks. Failure to do so could cause permanent damage to the Phidget.

Related Videos