pH Phidget
For applications involving water quality and chemistry, this module is a great addition to your collection. You can use this adapter to measure one pH or voltage-based probe that uses a BNC connector. The ADP1000 connects to a port on a VINT Hub. See the “comaptible products” tab for a list of hubs.
Isolated for Stability
The VINT connector on this board is electrically isolated from the probe connection, which allows the probe to be used in a solution that is electrically noisy. For example, it could be used in a tank containing pumps and other electronic equipment without any problems.
Product Specifications
| Sensor Properties | |
|---|---|
| Controlled By | VINT |
| ?±400mV Range | |
| Voltage Resolution | 40 ?¼V DC |
| Measurement Error Max | ?± 0.1 % |
| Sampling Interval Max | 60 s/sample |
| Sampling Interval Min | 50 ms/sample |
| Voltage Noise | 65 ?¼V DC |
| PHSensor Mode | |
| pH Resolution | 0.0007 |
| Measurement Error Max | ?± 0.1 % |
| Sampling Interval Max | 60 s/sample |
| Sampling Interval Min | 50 ms/sample |
| pH Noise | 0.0011 |
| ?±2V Range | |
| Voltage Resolution | 200 ?¼V DC |
| Measurement Error Max | ?± 0.5 % |
| Sampling Interval Max | 60 s/sample |
| Sampling Interval Min | 50 ms/sample |
| Voltage Noise | 235 ?¼V DC |
| Voltage Sensor | |
| Sensor Input Impedance | 1 T?© |
| Number of Voltage Inputs | 1 |
| Electrical Properties | |
| Current Consumption Min | 6 mA |
| Current Consumption Max | * 10 mA |
| Physical Properties | |
| Operating Temperature Min | -40 ?°C |
| Operating Temperature Max | 85 ?°C |
* – Varies depending on selected data interval. See the technical section of the User Guide for details.