Hollow Shaft Optical Encoder IHC3808

Note: The 3532_1 is the same as the 3532_0, except this revision has a 5-pin connector soldered to the end of the cable so it can be plugged directly into a Phidgets encoder interface.

This sturdy optical quadrature encoder can be attached to the 8mm rear shaft of a motor without need for a shaft coupler. It has 360 counts (full quadrature cycles) per rotation and can be installed easily by fitting it over the shaft and tightening the set-screw. This encoder makes use of the index channel, sending one pulse for every full rotation.

Comes Packaged With

Mounting screws and washers

Product Specifications

Encoder Properties
Output Circuit Type	Push-Pull (Single-Ended)
Controlled By	Encoder Interface
Encoder Resolution	360 CPR
Encoder Speed Max	4500 RPM
Electrical Properties
Supply Voltage Min	5 V DC
Supply Voltage Max	5 V DC
Output Frequency Max	100 kHz
Physical Properties
Shaft Diameter	(Inner) 8 mm
Shaft Maximum Axial Load	10 N
Shaft Maximum Radial Load	20 N
Operating Humidity Min	30 %RH
Operating Humidity Max	(Non-condensing) 85 %RH
Operating Temperature Min	-10 °C
Operating Temperature Max	70 °C
IP Rating	IP54
Weight	121 g

// <![CDATA[
$(document).ready(function() { // Toggle discount pricing on product page if($('#ph-j-price-table tbody tr').length > 4) { $('#ph-j-price-table').append(' ' + $('#ph-j-price-table tbody tr:nth-child(4) td:nth-child(1)').text() + '+ ... '); $('#ph-j-show-pricing').click(function() { $('#ph-j-price-table tbody').addClass('ph-all-prices'); $('#ph-j-price-table tfoot').remove(); }); } else if($('#ph-j-price-table tbody tr').length === 4) { $('#ph-j-price-table tbody').addClass('ph-all-prices'); } $('#ph-addtocart-btn').click(function() { addToCart('405', getAddQty(), getAddMeas(), '3532_0'); }); });
// ]]>