Optical Rotary Encoder 4mm Shaft
Product Description
This is a small ball bearing construction, rotary encoder without index that goes up to 3000 rpm.
Connection
This encoder connects to a quadrature encoder interface. The connector at the end of the cable is compatible with all Phidgets encoder interfaces. To attach the shaft of this encoder to a motor or some other device, you can use a shaft coupler. See the Connection & Compatibility tab for details on interfaces and couplings.
Comes Packaged With
- Two mounting screws
Product Specifications
Product Specifications
| Encoder Properties | |
|---|---|
| Output Circuit Type | Push-Pull (Single-Ended) |
| Controlled By | Encoder Interface |
| Encoder Resolution | 360 CPR |
| Encoder Speed Max | 3000 RPM |
| Electrical Properties | |
| Supply Voltage Min | 5 V DC |
| Supply Voltage Max | 5 V DC |
| Output Frequency Max | 80 kHz |
| Physical Properties | |
| Shaft Diameter | 4 mm |
| Shaft Maximum Axial Load | 10 N |
| Shaft Maximum Radial Load | 20 N |
| Operating Humidity Min | 30 %RH |
| Operating Humidity Max | (Non-condensing) 85 %RH |
| Operating Temperature Min | -25 °C |
| Operating Temperature Max | 85 °C |
| IP Rating | IP54 |
| Weight | 83 g |