- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
₪520.00
99999 in stock
All the reasons to purchase from us
The 3575 linear actuator has a stroke length of 140mm and a 63:1 gearbox. It is able to move at a rate of 20 mm/s and can exert up to 75N of force at lower speeds.
In order to connect this actuator to a terminal block, you’ll need to cut off the 5-pin connector and strip the wires. For more details, see the “Compatible Products” tab.
This actuator does not have built-in limit switches, so you may damage the motor or gears if you run the actuator beyond its minimum or maximum stroke. We recommend using the actuator’s built-in potentiometer in your program to ensure that the motor is shut off whenever the potentiometer voltage gets close to 0V or 5V. Have a look at the “Resources” tab for a link to a project that implements a control loop using the potentiometer value.
| Motor Properties | |
|---|---|
| Motor Type | DC Linear Actuator |
| Stroke Length | 140 mm |
| Maximum Speed | 20 mm/s |
| Peak Power Point | (@ 10 mm/s) 75 N |
| Peak Efficiency Point | (@ 15 mm/s) 38 N |
| Gear Ratio | 63:1 |
| Positional Error Max | 500 ?¼m |
| Electrical Properties | |
| Rated Voltage | 12 V DC |
| Potentiometer Impedance | 25 k?© |
| Physical Properties | |
| Gear Train Material | Metal |
| Backdrive Force | 46 N |
| Side Force Max | 20 N |
| Wire Length | 350 mm |
| Weight | 84 g |
| Operating Temperature Min | -10 ?°C |
| Operating Temperature Max | 50 ?°C |
| IP Rating | IP54 |
All the reasons to
purchase from us
