- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
₪520.00
99999 in stock
All the reasons to purchase from us
The Actuonix L16 series of linear actuators are compact DC motors geared to push or pull loads along the stroke of the actuator. This actuator comes with a built-in potentiometer, allowing your application to monitor the actuator’s position.
The 3570 linear actuator has a stroke length of 50mm and a 35:1 gearbox. It is able to move at a rate of 32 mm/s and can exert up to 50N of force at lower speeds.
In order to connect this actuator to a terminal block, you’ll need to cut off the 5-pin connector and strip the wires. For more details, see the “Compatible Products” tab.
This actuator does not have built-in limit switches, so you may damage the motor or gears if you run the actuator beyond its minimum or maximum stroke. We recommend using the actuator’s built-in potentiometer in your program to ensure that the motor is shut off whenever the potentiometer voltage gets close to 0V or 5V. Have a look at the “Resources” tab for a link to a project that implements a control loop using the potentiometer value.
| Motor Properties | |
|---|---|
| Motor Type | DC Linear Actuator |
| Stroke Length | 50 mm |
| Maximum Speed | 32 mm/s |
| Peak Power Point | (@ 16 mm/s) 50 N |
| Peak Efficiency Point | (@ 24 mm/s) 24 N |
| Gear Ratio | 35:1 |
| Positional Error Max | 300 ?¼m |
| Electrical Properties | |
| Rated Voltage | 12 V DC |
| Potentiometer Impedance | 9 k?© |
| Physical Properties | |
| Gear Train Material | Metal |
| Backdrive Force | 31 N |
| Side Force Max | 40 N |
| Wire Length | 350 mm |
| Weight | 56 g |
| Operating Temperature Min | -10 ?°C |
| Operating Temperature Max | 50 ?°C |
| IP Rating | IP54 |
All the reasons to
purchase from us
