- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
₪780.00
99999 in stock
All the reasons to purchase from us
The Sinokoko P5H series of linear actuators are high-torque DC motors geared to push or pull a load along the stroke of the actuator. This actuator comes with a built-in potentiometer, allowing your application to monitor the actuator’s position.
The 3546 linear actuator has a stroke length of 150mm, can move at a rate of 10 mm/s and can extert up to 750N of force at lower speeds.
| Motor Properties | |
|---|---|
| Motor Type | DC Linear Actuator |
| Stroke Length | 150 mm |
| Maximum Speed | 10 mm/s |
| Peak Power Point | 750 N |
| Electrical Properties | |
| Rated Voltage | 24 V DC |
| Potentiometer Impedance | 5 kО© |
| Physical Properties | |
| Material | Aluminium Alloy |
| Gear Train Material | Powder Metallurgy |
| IP Rating | IP56 |
| Weight | 1 kg |
| Operating Temperature Min | -25 В°C |
| Operating Temperature Max | 65 В°C |
You’ll need a motor controller to get control of the position of this actuator. In order to connect it to a controller, attach the red wire to the “”+”” terminal on the controller, and the black wire to the “”-“” terminal.
If you decide to use a motor controller with an analog input, you can connect the integrated potentiometer by soldering the wires to a Phidget cable and connecting it to the input. If you decide to use a stand-alone motor controller, you’ll also need a device with an analog input to read the potentiometer.
| Controller Properties | Board Properties | ||||
|---|---|---|---|---|---|
| Part Number | Number of Motor Ports | Velocity Resolution | Acceleration Resolution | Continuous Motor Current Max | Controlled By |
| 1064_1B | 2 | 0.79 % Duty Cycle | 1.9 % Duty Cycle/s | (per motor) 14 A | USB (Mini-USB) |
| 1065_0B | 1 | 0.39 % Duty Cycle | 24.5 % Duty Cycle/s | 5 A | USB (Mini-USB) |
| DCC1000_0 | 1 | 0.001 % Duty Cycle | 1 % Duty Cycle/s | 25 A | VINT |
To easily connect the internal potentiometer to an IO board we recommend you use a Phidget cable. You can solder multiple cables together in order to make even longer Phidget cables, but you should be aware of the effects of having long wires in your system. The following table describes how to wire the potentiometer to the Phidget cable:
| Wire Color | Function |
|---|---|
| White | Potentiometer Ground |
| Blue | Potentiometer Wiper |
| Red | Actuator Motor Power |
| Black | Actuator Motor Ground |
| Yellow | Potentiometer Power |
All the reasons to
purchase from us