- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
This 8-pole BLDC gear motor can output 193.7 kg-cm of torque at speeds of up to 38 RPM. The shaft has a 4mm keyway for better coupling
₪690.00
99999 in stock
All the reasons to purchase from us
The DCM4105 is a 24 volt brushless DC motor, generating 190 Kg-cm of torque at 38 RPM. The shaft is equipped with a 4mm key to improve coupling.
Brushless DC motors provide convenient position and velocity control through the use of their built in hall-effect sensor. They run quieter and last longer than their brushed counterparts. The 106:1 planetary gearbox on this motor results in higher torque at the cost of speed.
This motor must be controlled by a brushless DC motor controller that has the capability to both send control signals to the three motor wires, and also read the hall-effect feedback from the other five wires. Have a look at the Compatible Products tab for a list of compatible Phidget controllers.
This motor comes with a 5-Pin molex connector soldered to the hall effect wires, and ferrules crimped onto the motor wires so it can quickly and easily be connected to the Brushless DC Motor Phidget as shown in the functional picture.
| Motor Properties | |
|---|---|
| Motor Type | Brushless DC Motor |
| Number of Poles | 8 |
| Manufacturer Part Number | 42JXGT200K(106)/42DMW61-2440 |
| Output Power (Mechanical) | 50 W |
| Rated Torque | 193.7 kg·cm |
| Maximum Speed at Rated Voltage | 38 RPM |
| Electrical Properties | |
| Rated Current | 3.5 A |
| Rated Voltage | 24 V DC |
| Coil Resistance | 740 mΩ |
| Physical Properties | |
| Mounting Plate Size | 17 |
| Operating Temperature Min | -20 °C |
| Operating Temperature Max | 40 °C |
| Gearbox Properties | |
| Gearbox Type | Planetary Gearbox |
| Gear Ratio | 106 : 1 |
All the reasons to
purchase from us