- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
This 4-pole BLDC gear motor can output 57.1kg-cm of torque at speeds of up to 170 RPM. The shaft has a 4mm keyway for better coupling
₪780.00
99999 in stock
The DCM4109 is a 24 volt brushless DC motor, generating 56 Kg-cm of torque at 170 RPM. The shaft is equipped with a 4mm key to improve coupling.
Brushless DC motors provide convenient position and velocity control through the use of their built in hall-effect sensor. They run quieter and last longer than their brushed counterparts. The 23:1 planetary gearbox on this motor results in higher torque at the cost of speed.
This motor must be controlled by a brushless DC motor controller that has the capability to both send control signals to the three motor wires, and also read the hall-effect feedback from the other five wires. Have a look at the Compatible Products tab for a list of compatible Phidget controllers.
This motor comes with a 5-Pin molex connector soldered to the hall effect wires, and ferrules crimped onto the motor wires so it can quickly and easily be connected to the Brushless DC Motor Phidget as shown in the functional picture.
Motor Properties | |
---|---|
Motor Type | Brushless DC Motor |
Number of Poles | 4 |
Manufacturer Part Number | 56JXE300K(23)/57DMWH75-2440 |
Output Power (Mechanical) | 115 W |
Rated Torque | 57.1 kg·cm |
Maximum Speed at Rated Voltage | 170 RPM |
Electrical Properties | |
Rated Current | 4.5 A |
Rated Voltage | 30 V DC |
Coil Resistance | 900 mΩ |
Physical Properties | |
Mounting Plate Size | 23 |
Operating Temperature Min | -20 °C |
Operating Temperature Max | 40 °C |
Gearbox Properties | |
Gearbox Type | Planetary Gearbox |
Gear Ratio | 23 : 1 |
All the reasons to
purchase from us