57STH56 NEMA-23 Bipolar Stepper with 4.25:1 Gearbox

57STH56 NEMA-23 Bipolar Stepper with 4.25:1 Gearbox

Manufacturer :

PN 3332_0 Category

External Url:

Loading...
This bipolar stepper with a rear shaft and a planetary gearbox has a 0.42В° step angle and 46.6 kgВ·cm of torque at low speeds.

660.00

99999 in stock

Loading...

All the reasons to purchase from us

  • Professional customer service
  • Attractive prices
  • Fast delivery times!
Warranty: 12 months

Delivery time: up to 10 business days
image_pdfimage_print

This NEMA-23 motor has an integrated Planetary gearbox with a 41/4 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. See the “Compatible Products” tab for a complete list of attachments.

When connected to a 1067 – PhidgetStepper Bipolar HC, the 3332 has a maximum speed of 375 RPM. At the output of the gearbox, the step angle is approximately 0.42?°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8?° by the gearbox reduction ratio. See the “Compatible Products” tab for wiring details.

Connection

This motor must be controlled by a constant current or chopper drive controller. You can find a list of suitable controllers on the Compatible Productstab. There you will also find compatible attachments such as encoders, mounting hardware, and transmission hardware.

Warning

Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.

Product Specifications

Motor Properties
Motor Type Bipolar Stepper
Manufacturer Part Number 57STH56-2804B / 56JXS300K4.25
Step Angle 0.42?°
Step Accuracy ?± 5 %
Holding Torque 53 kg?·cm
Rated Torque 46.6 kg?·cm
Maximum Speed (w/1067 Motor Controller) 375 RPM
Acceleration at Max Speed
(w/1067 Motor Controller)
1.1E+06 1/16 steps/sec?²
Electrical Properties
Recommended Voltage 12 V DC
Rated Current 2.8 A
Coil Resistance 900 m?©
Phase Inductance 2.5 mH
Physical Properties
Shaft Diameter 12 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA – 23
Weight 1.2 kg
Number of Leads 4
Wire Length 300 mm
Gearbox Properties
Gearbox Type Planetary
Gear Ratio 4 14 : 1
Backlash Error 1 12
Maximum Strength of Gears 90 kg?·cm
Shaft Maximum Axial Load 100 N
Shaft Maximum Radial Load 250 N

Documents

  • Stepper Motor and Controller Primer
  • Mechanical Drawings

Projects

  • Motor Music: Play MIDI Files using Phidget Stepper Motors (June 1, 2015)
  • How To Avoid Resonance Issues in Stepper Motors (July 28, 2014)
  • Steppers with Encoders: When Open-loop Control Is Not Enough (May 13, 2014)

Motor Controllers

This motor must be controlled by a stepper motor controller. This diagram shows how to connect the motor wires to the controller to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

Note: Make sure to unplug the power cord from the motor controller before switching wires around.

The following stepper controllers can be used to drive this motor:

 

Product Controller Properties Electrical Properties
Part Number Motor Position Resolution Stepper Velocity Resolution Stepper Velocity Max Available Current per Coil Max
1067_0B 116 Step (40-Bit Signed) 1 1/16 steps/sec 250000 1/16 steps/sec 4 A
STC1000_0 116 Step (40-Bit Signed) 1 1/16 steps/sec 115000 1/16 steps/sec 4 A

Encoders

The rear shaft of this motor can be equipped with an encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor. The mounting holes on the back of this motor are compatible with the following encoders:

Product Encoder Properties
Part Number Output Circuit Type Encoder Resolution Encoder Speed Max
3531_0 Push-Pull (Single-Ended) 300 CPR 6000 RPM

Shaft Couplers

If you need to connect the main shaft of this motor to the shaft of another device, you can use a shaft coupler:

Product Physical Properties
Part Number Inner Diameter Material Coupling Rated Torque Coupling Rated Speed
3428_0 12 mm Aluminium 60.7 kg?·cm 16000 RPM
TRM4317_0 12 mm Aluminum 35.7 kg?·cm 12000 RPM
TRM4318_0 12 mm Aluminum 611.8 kg?·cm 4000 RPM

 

Print Friendly, PDF & Email

Get back to me about this product

All the reasons to
purchase from us

  • Professional customer service
  • Attractive prices
  • Fast delivery times!

  • Warranty: 12 months
  • Delivery time: up to 10 business days

shopping cart

Print Friendly, PDF & Email
Your cart is currently empty.

Return to shop