- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
₪360.00
99999 in stock
All the reasons to purchase from us
Note: The 3532_1 is the same as the 3532_0, except this revision has a 5-pin connector soldered to the end of the cable so it can be plugged directly into a Phidgets encoder interface.
This sturdy optical quadrature encoder can be attached to the 8mm rear shaft of a motor without need for a shaft coupler. It has 360 counts (full quadrature cycles) per rotation and can be installed easily by fitting it over the shaft and tightening the set-screw. This encoder makes use of the index channel, sending one pulse for every full rotation.
| Encoder Properties | |
|---|---|
| Output Circuit Type | Push-Pull (Single-Ended) |
| Controlled By | Encoder Interface |
| Encoder Resolution | 360 CPR |
| Encoder Speed Max | 4500 RPM |
| Electrical Properties | |
| Supply Voltage Min | 5 V DC |
| Supply Voltage Max | 5 V DC |
| Output Frequency Max | 100 kHz |
| Physical Properties | |
| Shaft Diameter | (Inner) 8 mm |
| Shaft Maximum Axial Load | 10 N |
| Shaft Maximum Radial Load | 20 N |
| Operating Humidity Min | 30 %RH |
| Operating Humidity Max | (Non-condensing) 85 %RH |
| Operating Temperature Min | -10 °C |
| Operating Temperature Max | 70 °C |
| IP Rating | IP54 |
| Weight | 121 g |
All the reasons to
purchase from us
