- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
This 700mm linear encoder has a quadrature output with index channel and is ideal for use in linear systems
₪1,020.00
99999 in stock
All the reasons to purchase from us
This linear encoder converts movement along it’s 700mm of travel into a quadrature signal that is readable by any of our encoder interfaces. It has an index channel that triggers in several places along the length of the encoder to aid in startup calibration.
By default this encoder ships with a DB9 connector that has the following pinout:
| Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|---|---|
| Signal | NC | Gnd | NC | Shield | NC | A | Vcc | B | Index |
| Color | Black | Shielding | Yellow | Red | Green | Brown |
In order to connect this device to a Phidgets encoder board, you’ll need to remove the DB9 connector and solder on the included 5-pin encoder cable. See the Connection & Compatibility tab for more details.
| Encoder Properties | |
|---|---|
| Length Resolution | 5 μm/cyc |
| Electrical Properties | |
| Supply Voltage Min | 5 V DC |
| Supply Voltage Max | 5 V DC |
| Physical Properties | |
| Travel | 700 mm |
| IP Rating | IP55 |
| Maximum Speed | 1 m/s |
This linear encoder must be read by an encoder interface. These interfaces will interpret the two quadrature signals in order to determine the continuous position of the carriage. If you want to use the device with one of our encoder interfaces you will need to remove the DB9 connector and solder on the included 5-pin encoder cable. You’ll need to connect them as follows:
| Encoder | Green | Red | Yellow | Brown | Black |
|---|---|---|---|---|---|
| Cable Connector | Brown | Red | White | Green | Black |
All the reasons to
purchase from us