- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
₪180.00
99999 in stock
All the reasons to purchase from us
This compact, economical optical quadrature encoder can be attached to the 4mm rear shaft of a motor. It has 300 counts (full quadrature cycles) per rotation and can be installed by fitting it over the shaft, mounting it to the back of the motor, and tightening the set-screw. For complete assembly instructions, take a look at the user guide. This encoder does not support the use of an index channel.
The mounting holes on the HKT22 encoder line up with the holes on the back of any rear-shaft stepper motor sold at Phidgets, Inc. For a list of compatible motors and encoder interfaces, see the Compatible Products tab.
| Encoder Properties | |
|---|---|
| Controlled By | Encoder Interface |
| Output Circuit Type | Push-Pull (Single-Ended) |
| Encoder Speed Max | 6000 RPM |
| Encoder Resolution | 300 CPR |
| Electrical Properties | |
| Supply Voltage Min | 5 V DC |
| Supply Voltage Max | 5 V DC |
| Output Frequency Max | 30 kHz |
| Physical Properties | |
| Inner Diameter | 4 mm |
| Operating Humidity Min | 30 %RH |
| Operating Humidity Max | (Non-condensing) 85 %RH |
| Operating Temperature Min | -10 ?°C |
| Operating Temperature Max | 85 ?°C |
| IP Rating | IP40 |
| Weight | 4 g |
All the reasons to
purchase from us