- Tel: +972-52-3469547
- Fax: +972-773457377
- E-mail: sales@testview.co.il
Manufacturer :
External Url:
Detect a touch through up to 1/2″ of glass or plastic with this low-cost capacitive sensor
₪70.00
99999 in stock
All the reasons to purchase from us
Note: The 1129_1B is identical to the 1129_1, except that you have the option of which size of Phidget cable to include.
The 1129 is a capacitive touch sensor and can detect a touch through plastic, glass, or paper. We recommend a material thickness of up to 1/2”.
The sensor can work as a close proximity sensor, sensing objects at a distance of up to 1/2” from the board in all directions without direct contact.
On the bottom side of the Touch Sensor there is a small exposed metallic pad. A soldered connection can be made to the pad to increase the size and dimensions of the touchable area, such as attaching the sensor to a metallic object or some wire.
The 1129_1B has a sensing chip that recalibrates after 45 seconds of contact (as opposed to 60 seconds on the 1129_0). Other than that, this sensor will function the same as the 1129_0. Please refer to the table below to see the differences:
| Sensor Properties | |
|---|---|
| Sensor Type | Touch (Capacitive) |
| Controlled By | VoltageRatio Input |
| Sensor Output Type | Ratiometric |
| Detecting Distance Max | 12.7 mm |
| Electrical Properties | |
| Current Consumption Max | 500 μA |
| Output Impedance | 1 kΩ |
| Supply Voltage Min | 1.8 V DC |
| Supply Voltage Max | 5.5 V DC |
| Physical Properties | |
| Operating Temperature Min | -40 °C |
| Operating Temperature Max | 85 °C |
All the reasons to
purchase from us