Wireless VINT Hub

Wireless VINT Hub

Manufacturer :

PN HUB5000_0 Category

External Url:

Loading...

Use Phidgets in your local network with this 6 port Wireless VINT Hub. Works with ethernet or a WiFi network

400.00

99999 in stock

Loading...

All the reasons to purchase from us

  • Professional customer service
  • Attractive prices
  • Fast delivery times!
Warranty: 12 months

Delivery time: up to 10 business days
image_pdfimage_print

The Wireless VINT Hub is the easiest way to use Phidgets in locations far away from a computer. As long as there’s a local WiFi signal and a nearby power outlet, this hub will make any attached Phidgets accessible to computers on the network without having to worry about using long cables. You can also wire it directly into your modem or network switch using an ethernet cable.

 

 

 

Six Versatile I/O Ports

 

With a Wireless VINT Hub, you can connect Phidgets and make them available on your local network. Each VINT port can perform one of four roles:

 

 

 

  • read a 0-5V Voltage or ratiometric sensor

 

  • act as a digital output

 

  • act as a digital input

 

 

Each port has a power and ground pin, so you can also use the ports to gain access to the USB voltage supply directly.

 

 

Plug in one of our many VINT-enabled Phidgets that perform a wide variety of functions. Control motors and LEDs, measure temperature or motion, or build a large scale system with many inputs and outputs.

 

Easy to Use

 

VINT Devices are ‘plug and program’: automatically discovered by the Phidget API with the same ease of programming you’ve come to expect from Phidgets. Each VINT device has a full API with functions and events to make programming a snap. See the API tab for more information.

 

Analog Sensor Compatible

 

Sometimes, you just need a few simple analog voltage sensors. Luckily, your collection of Phidget Analog Input sensors is not obsolete; each port on the Wireless VINT Hub can interface a 0-5V sensor. The VINT Port is backwards compatible with both ratiometric and non-ratiometric Phidget analog sensors.

 

Digital I/O Mode

 

In digital output mode, a VINT port can be used to drive LEDs, relays, digital circuits, and other simple electronics. Each port is PWM-enabled, allowing you to dim LEDs to a specific brightness.

 

Wire a switch or sensor contact directly into a VINT Port, and use the Digital Input mode to read the state of the switch.

 

If you need more than six inputs or outputs, you can expand by attaching a VINT I/O module. For example, there are VINT digital output modules with 16 outputs, allowing 96 digital outputs on a single hub!

 

Product Specifications

 

 

 

Board

 

Controlled By

 

Local Network (Ethernet or Wi-Fi)

 

 

Number of VINT Ports

 

6

 

 

Electrical Properties

 

USB Voltage Min

 

4.5 V DC

 

 

USB Voltage Max

 

5.3 V DC

 

 

USB Speed

 

High Speed

 

 

Current Consumption Min

 

32.5 mA

 

 

Available External Current

 

600 mA

 

 

Supply Voltage Min

 

8 V DC

 

 

Supply Voltage Max

 

30 V DC

 

 

Voltage Inputs

 

Number of Voltage Inputs

 

6 (Shared)

 

 

Voltage Input Resolution

 

* 16 bit

 

 

Sensor Input Impedance

 

324 kΩ

 

 

Input Voltage Min (DC)

 

0 V DC

 

 

Input Voltage Max (DC)

 

5 V DC

 

 

Voltage Input Noise

 

** 1 mV DC

 

 

Sampling Interval Max

 

60 s/sample

 

 

Sampling Interval Min

 

1 ms/sample

 

 

Digital Inputs

 

Pull-up Resistance

 

124 kΩ

 

 

Low Voltage Max (True)

 

1 V DC

 

 

High Voltage Min (False)

 

1.8 V DC

 

 

Low Voltage Trigger Length Min

 

3 ms

 

 

High Voltage Trigger Length Min

 

3 ms

 

 

Digital Input Voltage Max

 

5.5 V DC

 

 

Digital Input Type

 

Switch (Active Low)

 

 

Number of Digital Inputs

 

6 (Shared)

 

 

Digital Outputs

 

Series Resistance

 

510 Ω

 

 

Digital Output Available Current

 

8.1 mA

 

 

Digital Output Voltage Min

 

0 V DC

 

 

Digital Output Voltage Max

 

3.3 V DC

 

 

PWM Frequency Max

 

50 kHz

 

 

PWM Resolution

 

0.8 %

 

 

Number of Digital Outputs

 

6 (Shared)

 

 

Physical Properties

 

Operating Temperature Min

 

-40 °C

 

 

Operating Temperature Max

 

85 °C

 

 

 

 

 

* – Voltage measured with a 10-bit ADC, oversampled to 16-bits.

 

** – Typical noise varies from 600uV to 10mV depending on selected data interval.

Print Friendly, PDF & Email

Get back to me about this product

All the reasons to
purchase from us

  • Professional customer service
  • Attractive prices
  • Fast delivery times!

  • Warranty: 12 months
  • Delivery time: up to 10 business days

shopping cart

Print Friendly, PDF & Email
Remove item Thumbnail image Product Price Quantity Subtotal
× Differential Gas Pressure Sensor ±2 kPa 220.00
440.00
× K-Type Thermocouple Connector 40.00
40.00
× Hook-up Wire 22AWG Blue 10.00
10.00
× 2GT Pulley with 5mm Bore and 16 Teeth 20.00
20.00
× 12V/0.2Kg-cm/1080RPM 3.7:1 DC Gear Motor w/ Encoder 340.00
340.00
× RGB LED Modules - String of 10 190.00
190.00
× Jaw Coupling Half 17mm Series 38 220.00
220.00
× 20-bit (±40V) Voltage Input Phidget 340.00
340.00
× Linear Bar Connector-PG20 with set screws (4 pcs) 60.00
60.00
× Acrylic Enclosure for the 1057 60.00
60.00
× Shorting Plug 205.00
205.00
× Ball Screw SFU01605 x 800mm w/Nut 570.00
1,140.00
× LCD cable - 1x16 connector 30.00
30.00
× Linear Encoder 900mm 1,120.00
1,120.00
× #40 Chain Sprocket with 17mm Bore and 20 Teeth 160.00
160.00
× Phidget Cable 90cm 20.00
20.00
× 12V/8.4Kg-cm/28RPM 139:1 DC Gear Motor 180.00
180.00
× Acrylic Enclosure for the 1135 60.00
60.00
× 12V/17.3Kg-cm/18RPM 139:1 DC Gear Motor 380.00
380.00
× 12 Conductor 22AWG Wire Black 30.00
30.00
× Inner Bracket PG30-B with set screw (8 pcs) 70.00
70.00
× Bracket-PG40-80x80 60.00
60.00
× #40 Chain Sprocket with 0.5 Bore and 9 Teeth" 40.00
40.00
× (±40V) Voltage Input Phidget 180.00
180.00
× 5GT Pulley with 14mm Bore and 50 Teeth 100.00
100.00
× 57DMWH75 NEMA23 Brushless Motor with 96:1 Gearbox 860.00
860.00
× Acrylic Enclosure for the 1024 80.00
80.00
× 10mm Blue LED - Bag of 10 30.00
30.00
× PhidgetInterfaceKit 0/16/16 590.00
590.00

Cart Totals

Subtotal 7,055.00
Shipping
  • Self collection Will picked up from Ha-Mechkar 5, RSL building 1st floor, Migdal haemeq, Israel 2306989, IL

Shipping options will be updated during checkout.

Total 7,130.00