T-Slot Kit PG40

This kit is ideal for learning all of the different ways to assemble T-Slot and to test out what might work for your project. This kit includes bolts and washers, which are needed by most of the brackets and connectors in order to join the profiles together. This kit even contains a drill bit and a tapping bit, which are needed when using the screw connectors.

Comes Packaged with

• 1x Plastic Organizing Case
• 4x TSL4004 – PG40 Profile 40×40 (15cm lengths)
• 4x TSL4004 – PG40 Profile 40×40 (30cm lengths)
• 1x TSL4005 – PG20 Profile 40×80 (30cm length)
• 2x TSL4101 – Anchor Connector PG40
• 4x TSL4106 – Bracket PG40 40×40
• 8x TSL4113 – Inner Bracket PG40-A
• 8x TSL4114 – Inner Bracket PG40-B
• 2x TSL4121 – Butt Connector PG40
• 1x TSL4123 – Cubic Connector PG40
• 10x TSL4204 – Pre-set Nut PG40 M5
• 10x TSL4205 – Pre-set Nut PG40 M6
• 10x TSL4206 – Pre-set Nut PG40 M8
• 10x TSL4211 – T-Nut PG40 M5
• 10x TSL4212 – T-Nut PG40 M6
• 10x TSL4213 – T-Nut PG40 M8
• 10x TSL4223 – Screw Connector PG40
• 6x TSL4304 – End Cap PG30 4040
• 2x TSL4305 – End Cap PG30 4080
• 8x TSL4308 – Grey Plastic Cover PG40
• 4x TSL4313 – Panel Insert PG40
• 9x 20mm Washer
• 10x M5 Bolt (20mm)
• 10x M5 Bolt (18mm)
• 10x M5 Bolt (16mm)
• 10x M5 Bolt (14mm)
• 10x M5 Bolt (12mm)
• 10x M6 Bolt (20mm)
• 10x M6 Bolt (18mm)
• 10x M6 Bolt (16mm)
• 10x M6 Bolt (14mm)
• 10x M6 Bolt (12mm)
• 8x M8 Bolt (20mm)
• 9x M8 Bolt (18mm)
• 9x M8 Bolt (16mm)
• 10x M8 Bolt (14mm)
• 10x M8 Bolt (12mm)
• 1x Drill Bit
• 1x Tapping Bit

Note: Quantities for bolts and washers may vary slightly.